Automatic Level Control Sensor Link Replacement Twist Axle
Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the ELC sensor link from the tie rod ball stud. Remove the ELC sensor link from the sensor arm ball stud.
Installation Procedure
- Install the link to the tie rod and the sensor arm.
- Lower the vehicle.
Automatic Level Control Sensor Link Replacement IRS
Removal Procedure
- Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
- Remove the ELC sensor link (1) from the ball studs on the sensor and control arm.
Installation Procedure
- Position the ELC sensor link (1) to the ball studs on the sensor and control arm.
- Press the ELC sensor link ends onto the ball studs until fully seated.
- Lower the vehicle.