GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2006 🢒 RELAY - AWD 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Body Side Window Actuator Replacement

Removal Procedure
  1. Remove the rear corner upper garnish molding. Refer to Upper Rear Trim Finish Panel Replacement .

    2. Object Number: 1480111 Size: SH
  2. Disconnect the electrical connector from the rear quarter window actuator (1).
  3. Remove the rear quarter window actuator retaining bolts (2).
  4. Remove the screw that attaches the actuator arm to the window.
  5. Remove the actuator from the vehicle.

Installation Procedure

    Object Number: 1480111 Size: SH
  1. Position the actuator assembly (1) to the vehicle.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the screw that attaches the actuator arm to the window.

    3. Tighten
    Tighten the screw to 2 N·m (18 lb in).

  3. Install the rear quarter window actuator retaining bolts (2).

    4. Tighten
    Tighten the bolts to 10 N·m (89 lb in).

  4. Connect the electrical connector to the rear quarter window actuator.
  5. Install the rear corner upper garnish molding. Refer to Upper Rear Trim Finish Panel Replacement .