Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Release the connector positive assurance (CPA) connector at the headlamp connector.
3. Disconnect the electrical harness from the headlamp assembly prior to removal.

1

Headlamp Screws (Qty: 4)

Tip
Hold the lamp assembly to the hood when removing the screws.

Tighten
9 N·m (80 lb in)

2

Headlamp Assembly

Tip
Adjust the headlamps after servicing the headlamp assembly. Refer to Headlamp Aiming .