Scan Tool Data List. Saturn SKY 2007

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2007 🢒 SKY 🢒 Transmission/Transaxle 🢒 Manual Transmission - Aisin AR5 🢒 Scan Tool Data List

Table 1:	Engine Data List 2.0L (LNF)
Table 2:	Engine Data List 2.4L (LE5)

Use the scan tool data values under the following conditions:

•	The Diagnostic System Check - Vehicle is complete.

•	The on-board diagnostics (OBDs) are functioning properly.

•	No DTCs are present.

The values below represent a typical display recorded from a properly functioning system.

Important: Do not use a scan tool that displays faulty data. Report the condition to the scan tool manufacturer. The use of a faulty scan tool can result in misdiagnosis and the unnecessary replacement of parts.

Only the parameters listed below are used in this manual for diagnosing. If a scan tool displays other parameters, the values are not recommended by General Motors for use in diagnosis.

Scan tool values below were recorded under the following conditions:

•	Engine at idle

•	Upper radiator hose hot

•	Closed throttle

•	Transmission in Neutral

•	Closed Loop operation

•	Accessories OFF

•	Brake pedal not applied

Engine Data List 2.0L (LNF)

Scan Tool Parameter

Data List*

Units Displayed

Typical Data Values

CPP Switch (If Equipped)

1, 10, 12, 16, 17

Applied/ Released

Released

Vehicle Speed Sensor

ALL

km/h (mph)

*Data List Legend

•	Engine Data (1)

•	CMP Actuator Data (2)

•	EVAP Data (3)

•	Fuel System Data (4)

•	Fuel Trim Data (5)

•	HO2S Data (6)

•	Ignition Data (7)

•	Induction Data (8)

•	Misfire Data (9)

•	TAC Data (10)

•	Cooling / HVAC Data (11)

•	Cruise / Traction Data (12)

•	Electrical / Theft Data (13)

•	IPC Data (14)

•	Auto. Transmission Data (15)

•	Manual Transmission Data (16)

•	I/M Data (17)

Engine Data List 2.4L (LE5)