- Lubricate the shift lever plungers and the lever spring seat surface of the shift control housing with transmission fluid.
- Install the shift control lever extension shaft.
Notice: Refer to Fastener Notice in the Preface section.
- Install the shift control lever extension shaft socket retaining bolt.
Tighten
Tighten the retainer bolts to 20 N·m (14 lb ft).
- Install the shift control housing detent.
- Install the shift control housing detent plug spring.
- Install the shift control housing detent plug.
Tighten
Tighten the housing bolts to 24 N·m (18 lb ft).
- Install the shift control lever spring.
- Install the boot into the control lever housing.
- Install the shift control lever into the boot.