• | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
The electronic brake control module (EBCM) disables the antilock brake system (ABS) when other electronic control modules set DTCs for components that effect the operation of the traction control system.
• | The ignition switch is in the ON position. |
• | Ignition voltage is greater than 9.5 volts. |
The powertrain control module (PCM) or body control module (BCM) diagnose a condition preventing the engine control portion of the traction control function and sends a serial data message to the EBCM indicating that torque reduction is not allowed. The PCM or BCM will typically set a DTC and the EBCM will set this DTC.
One or more of the following actions may occur:
• | The EBCM disables the engine traction control system (ETS) until the DTC becomes a history DTC. |
• | The traction Off Indicator turns ON. |
• | The ABS remains functional. |
• | The condition for the DTC is no longer present. |
• | The EBCM automatically clears the history DTC when a current DTC is not detected in 100 consecutive drive cycles. |
Antilock Brake System Schematics
Antilock Brake System Connector End Views
Scan Tool Data List for EBCM
This DTC is for information only. As an aid to the technician, this DTC indicates that there are no problems in the ABS/ETS system.
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.