GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 SKY 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Vehicle Speed Sensor Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front floor closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front .

    3. Object Number: 1602274 Size: SH
  3. Disconnect the vehicle speed sensor (VSS) electrical connector (2).

    4. Object Number: 1602275 Size: SH
  4. Remove the VSS bolt (1).
  5. Remove the VSS (2).
  6. Remove the O-ring seal (3) from the VSS (2).

Installation Procedure

    Object Number: 1602275 Size: SH
  1. Install the O-ring seal (3) to the VSS (2).
  2. Install the VSS (2) to the transmission.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the VSS bolt (1).

    4. Tighten
    Tighten the bolt to 17 N·m (13 lb ft).


    Object Number: 1602274 Size: SH
  4. Connect the VSS electrical connector (2).
  5. Install the front floor closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front .
  6. Lower the vehicle.