Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Reposition either the left front or right front wheelhouse liner for access to the running lamp. Refer to Front Wheelhouse Liner Replacement .
3. Disconnect the fog lamp bulb socket electrical connector.
4. Disconnect the electrical connector harness for the DRL, Park and Turn Signal socket.

1

Daytime Running, Park and Turn Signal Lamp Assembly Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Daytime Running, Park and Turn Signal Lamp Assembly

Procedure

1. Transfer the fog lamp assembly to the new DRL lamp assembly. Refer to Front Fog Lamp Replacement .
2. Aim the fog lamp after installation. Refer to Fog Lamp Aiming .