Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
2. Disconnect the blower motor resistor electrical connector.

1

Screw, Blower Motor Resistor (Qty: 2)

Tighten
1.5 N·m (13 lb in)

2

Resistor, Blower Motor

3

Screw, Blower Motor (Qty: 3)

Tighten
1.5 N·m (13 lb in)

4

Motor Assembly, Blower