GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Saturn
🢒
2009
🢒
SKY
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Mass Airflow Sensor Replacement
Removal Procedure
Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF) sensor.
Remove the MAF sensor screws.
Remove the MAF sensor.
Installation Procedure
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the MAF sensor.
Install the MAF sensor screws and tighten to
0.6 N·m (5 lb in).
Connect the engine wiring harness electrical connector (1) to the MAF sensor.