Automatic Transmission Fluid Pressure Test Hole Plug Replacement for Saturn SKY 2009

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the front closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front.



3. Remove and discard the oil pressure test plug.

Caution: Refer to Fastener Caution in the Preface section.




1. Install a NEW oil pressure test plug and tighten to 11 N·m (97 lb in).
2. Check the transmission fluid level (fill if necessary). Refer to Transmission Fluid Check.
3. Install the front closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front.
4. Lower the vehicle.