Preliminary Procedure

1. Remove the front seat. Refer to Driver or Passenger Seat Replacement.
2. Remove the front seat cushion cover and pad. Refer to Seat Cushion Trim Cover and Pad Replacement.
3. Remove the seat back frame. Refer to Front Seat Back Frame Replacement.
4. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Control Module References.

1

Bolt, Seat Cushion Frame (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
25 N·m (18 lb ft)

2

Frame Assembly, Seat Cushion

Tip
Disconnect any electrical harness or connectors attached to the seat frame and reference for installation.