Backup Lamp Switch Replacement for Saturn SL 1999

1. Remove the air induction system. (DOHC shown, SOHC similar.)



2. Disconnect the electrical connector.
3. Remove the switch.

1. Apply sealant with Teflon® P/N 21485278 or equivalent on the threads before installing.
2. Install the switch.

Tighten
Tighten the back-up lamp switch to 38 N·m (28 lb ft).

3. Connect the electrical connector to the switch.



4. Install the air induction system. (DOHC shown, SOHC similar.)