Brake Component Specifications. Saturn SL 2001

For 1990-2009 cars only

Makes 🢒 Saturn 🢒 2001 🢒 SL 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Component Specifications

Application	Specification
Application	Metric	English
Brake Drums
Runout	0.15 mm	0.006 in
Inside Diameter	200.0 mm	7.87 in
Maximum Refinish Diameter	200.6 mm	7.90 in
Discard Diameter*	201.4 mm	7.93 in
Brake Rotors
Lateral Runout	0.060 mm	0.0024 in
Thickness Variation	0.013 mm	0.0005 in
Diameter	250.5 mm	9.86 in
New Thickness (Nominal)	18.0 mm	0.710 in
Minimum Thickness After Refinish	16.1 mm	0.633 in
Discard Thickness*	15.8 mm	0.625 in
Brake Linings
Front Disc Pads
New Thickness	11.0 mm	0.43 in
Discard Thickness	2.0 mm	0.08 in
Rear Drum Shoes
New Thickness	4.0 mm	0.16 in
Discard Thickness	1.0 mm	0.04 in
Hub and Bearing Assemblies
Front
End Play	0.020 mm	0.001 in
Lateral Runout	0.040 mm	0.0016 in
Rear
End Play	0.130 mm	0.005 in
Lateral Runout	0.050 mm	0.002 in
Radial Runout	0.130 mm	0.005 in
Master Cylinder Bore Diameter	22.2 mm	0.87 in
Caliper Bore Diameter	51.0 mm	2.01 in
Wheel Cylinder Bore Diameter	19.0 mm	0.75 in
Minimum Vacuum at Power Booster	--	15 in Hg
Brake System Fluid Capacity	0.5 liters	17.0 oz
*Brake drums and rotors have a discard diameter or thickness dimension cast into them. This is a wear dimension and not a refinish dimension. Any drum or rotor which does not meet the specification values should be discarded.