GM Service Manual Online
For 1990-2009 cars only

    Object Number: 863932  Size: SH
  1. Drive the roll pin out of differential housing and discard.
  2. Remove the pinion shaft.
  3. Rotate the pinion gears out of housing and remove.
  4. Remove the side gears.
  5. Remove the liner from housing.

  6. Object Number: 865694  Size: SH
  7. Remove the differential side bearings.
  8. • To remove the speed sensor side bearing, a bearing puller can be used.
    • To remove the differential gear side bearing, use a two jaw puller. Place a shield over bearing to provide protection if bearing should break.