Hood Release Lever Replacement LHD

1. Using cutting pliers, cut the fasteners off the mounting pins.
2. Remove the hood release lever.

1. Install the hood release lever over the mounting pins.
2. Install the fasteners on the mounting pins.
3. Using a deep well socket, push the fasteners down against the lever.

Hood Release Lever Replacement RHD Domestic

1. Remove the hood release handle assembly fasteners.
2. Remove the hood release handle assembly.
3. Remove the hood release cable from the lever.

1. Install the hood release cable to the handle assembly.
2. Install the hood release handle assembly to the filler panel.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the hood release handle assembly fasteners.

Tighten
Tighten the hood release lever-to-I/P filler panel fastener to 1.5 N·m (13 lb in).