For 1990-2009 cars only
Removal Procedure
- Hold the arm away from the glass and using a small flat blade screwdriver, disengage the wiper arm retaining latch, leaving the arm resting on the latch.
- Remove the wiper arm from the wiper motor shaft, being careful to pull straight.
Notice: Wagon rear wiper does not have a "Service Up" position. Lifting wiper too far away from glass can damage wiper system.
Installation Procedure
- Install the wiper arm to the wiper motor shaft positioning the wiper arm just below the 1st rear defroster grid at the bottom of the lift gate glass.
- Push the retaining latch inward to secure the wiper arm to the wiper motor shaft.
