Service Information Regarding 2000-2001 S Series Powertrain Control Module Calibrations
| Subject: | Service Information Regarding 2000 - 2001 S-Series Powertrain Control Module (PCM) Calibrations |
| Models: | 2000 - 2001 Saturn S-Series vehicles |
Purpose
The following chart is issued as a calibration reference for PCMs used on 2000 - 2001 Saturn S - Series vehicles.
When vehicle diagnosis leads to recalibration or replacement of a PCM, the current PCM calibration should be verified with Tech 2 (ID information).
The Saturn Service Stall System (SSS) will display valid calibrations for the vehicle being serviced. The calibrations listed in the following chart may vary from those displayed on the SSS if updates are issued prior to this bulletin being updated.
For 1991 - 1999 Saturn S-Series calibration information, refer to Technical Information Bulletin 96-T-46B.
COLUMN HEADING IDENTIFICATION FOR 2000 - 2001 PCMs |
|---|
SERVICE PLAN |
This is the Saturn service P/N of the PCM which calibration ID can be programmed into. A service PCM must be programmed with a valid CALIBRATION ID before it will function properly. |
ENGINE & EMISSIONS |
Engine and Emissions are used to determine proper calibration number. Refer to Service Parts Identification Label for correct emissions. |
DESCRIPTION |
Description identifies the purpose of calibration. |
TECHNICAL BULLETIN |
This is the Saturn Technical Information Bulletin number (if applicable), which details important service, diagnostic, and/or parts information specific to using CALIBRATION ID and/or Service P/N. |
CALIBRATION ID |
CALIBRATION ID Is displayed electronically using the Scan tool. |
Important: The most recent CALIBRATION ID will always be shown on top of each list to supersede previous CALIBRATION ID. This number represents the PCM hardware, software and calibration combination and is also referred to as the END MODEL NUMBER.
2000 S-Series PCM Calibration Table | |||||
|---|---|---|---|---|---|
Service P/N | Engine | Emissions | Description | Technical Bulletin | Calibration ID |
Auto Transaxle 21024986 21025110 | DOHC (LL0) | Federal (NF7) | DTC P0133 Calibration - Updated | 00-T-02B | 21009140 |
P0133 Calibration | 00-T-02 | 21009094 | |||
Production Calibration | - | 21009048 | |||
California (NC1) | DTC P0133 Calibration - Updated | 00-T-02B | 21009141 | ||
P0133 Calibration | 00-T-02 | 21009095 | |||
Production Calibration | - | 21009049 | |||
SOHC (L24) | Federal (NF7) | DTC P0133 Calibration - Updated | 00-T-02B | 21009143 | |
P0133 Calibration | 00-T-02 | 21009097 | |||
Production Calibration | - | 21009051 | |||
California (NC1) | DTC P0133 Calibration - Updated | 00-T-02B | 21009142 | ||
P0133 Calibration | 00-T-02 | 21009096 | |||
Production Calibration | - | 21009050 | |||
Manual Transxle 21024985 21025109 | DOHC (LL0) | Federal (NF7) | DTC P0133 Calibration - Updated | 00-T-02B | 21009144 |
P0133 Calibration | 00-T-02 | 21009098 | |||
Production Calibration | - | 21009052 | |||
California (NC1) | DTC P0133 Calibration - Updated | 00-T-02B | 21009045 | ||
P0133 Calibration | 00-T-02 | 21009099 | |||
Production Calibration | - | 21009053 | |||
SOHC (L24) | Federal (NF7) | DTC P0133 Calibration - Updated | 00-T-02B | 21009147 | |
P0133 Calibration | 00-T-02 | 21009101 | |||
Production Calibration | - | 21009055 | |||
California (NC1) | DTC P0133 Calibration - Updated | 00-T-02B | 21009146 | ||
P0133 Calibration | 00-T-02 | 21009100 | |||
Production Calibration | - | 21009054 | |||
