Removal Procedure
- Disable the SIR System. Refer to
Disabling the SIR System
in SIR.
- Remove the console. Refer to
Console Replacement
in
Instrument Panel, Gages and Console.
- Remove the park brake lever cover.
- Remove the park brake adjuster nut.
- Remove the park brake cables from the equalizer assembly.
- Pull the park brake lever to the highest position.
- Lift the equalizer cable over the park brake indicator switch and swing it
forward. Pull the cable down and out of the park brake lever.
Installation Procedure
- Slide the equalizer cable into the park brake lever. Hand start the adjuster
nut.
- Swing the equalizer cable rearward and lift over the park brake indicator
switch.
- Release and lower the park brake lever fully.
- Install the rear park brake cables into the equalizer.
- Adjust the park brake. Refer to
Park Brake Adjustment
.
- Install the park brake cover.
- Install the console. Refer to
Console Replacement
in Instrument Panel, Gages and Console.
- Enable SIR System. Refer to
Enabling the SIR System
in SIR.