Removal Procedure
- Disable the SIR system. Refer to
Enabling the SIR System
.
- Remove the console. Refer to
Console Replacement
.
- Unclip the boot assembly from the plastic retainer in the rear of the
shifter control assembly by pulling rearward and upward on the boot.
- Unclip the boot assembly from the two plastic retainers in the front of
the shifter control assembly and remove the boot.
Installation Procedure
- Place the boot on the shifter control assembly
and clip the two plastic retainers in the front of the shifter control assembly.
- Clip the boot assembly onto the plastic retainer in the rear of the shifter
control assembly.
- Install the console. Refer to
Console Replacement
.
- Enable the SIR system. Refer to
Enabling the SIR System
.