For 1990-2009 cars only
Removal Procedure
- Remove the sunroof glass. Refer to Sunroof Glass Panel Replacement .
- Remove the seal by pulling from the glass starting at the splice joint.
Installation Procedure
- Starting at the rear center of the sunroof glass, install the seal by pushing it onto the edge of the glass panel and gently stretching it.
- Approximately 102 mm (4 in) prior to completing installation of the seal, cut the seal so there is an extra 3.18 mm (1/8 in) in length.
- Apply Loctite 410® Black Toughened Instant Adhesive, or equivalent, to the splice joint area where the ends of the seal meet.
- With approximately 102 mm (4 in) of the seal unattached, push the 2 ends of the seal together in the glue joint.
- Install the remainder of the seal by pushing the seal onto the edge of the glass panel. The 3.18 mm (1/8 in) of the extra seal material should provide a tight seal at the splice joint.
- Install the sunroof glass. Refer to Sunroof Glass Panel Replacement .
