Install the drain hose by feeding it downward from the upper drain hose opening
of the spaceframe. The hose will appear in the lower drain hose opening in the lock
pillar area.
Pull the hose through the lower spaceframe opening, far enough to install
the grommet.
Install the hose to the grommet and the grommet into the lower spaceframe opening.
Connect the upper
end of the hose to the sunroof module.
Important: Inspect the drain hose for kinks. If necessary, cut the hose to the required
length to ensure that the hose is not kinked.
Pour water down from the sunroof tray and inspect for leaks. Repair
if a leak is detected.
Install the rear quarter panel. Refer to "Quarter Outer Panel"
installation procedure in Body Rear End.