DTC B0082 Coupe

When the ignition is turned ON, the SDM performs self-test to diagnose malfunctions inside the module. The SDM provides input power to the SIS. When input power is first detected, the SIS responds by performing internal diagnostics. Next the SIS sends an ID message to the SDM. The SDM will consider this to be a valid ID if the response time is less than 5 seconds after the SIS is powered up. The SIS will continually communicate a status message to the SDM. The SDM can reset the SIS by removing and applying power to it.

DTC B0082 can be set when an incorrect right SIS is installed. The following conditions must be met to set this DTC:

DTC B0082 Sedan

When the ignition is turned ON, the SDM performs self-test to diagnose malfunctions inside the module. The SDM provides input power to the SIS. When input power is first detected, the SIS responds by performing internal diagnostics. Next the SIS sends an ID message to the SDM. The SDM will consider this to be a valid ID if the response time is less than 5 seconds after the SIS is powered up. The SIS will continually communicate a status message to the SDM. The SDM can reset the SIS by removing and applying power to it.

DTC B0082 can be set when an incorrect right SIS is installed. The following conditions must be met to set this DTC: