Notice: Be careful not to damage the VIN plate when removing or replacing the upper trim panel.
Important: Be sure the upper trim panel seal is correctly seated on the forward edge before installing the upper trim panel.
Important: LHD illustration shown, RHD similar.
4.1. | Ensure the hook-and-loop fastener attachments on the upper trim panel are correctly inserted. |
4.2. | Position the upper trim panel on the retainer assembly. |
4.3. | Align the tabs on the sides the of upper trim panel with the openings in the windshield garnish molding. |
4.4. | Align the clips with the clip locations. |
4.5. | Firmly snap in the clips at the clip locations. |
Notice: Refer to Fastener Notice in the Preface section.
4.6. | Install the screws on underside of upper trim panel on passenger side of vehicle. |
Tighten
Tighten the upper I/P trim panel fasteners to 6 N·m (53 lb in)
Important: LHD illustration shown, RHD similar.