For 1990-2009 cars only
Removal Procedure
- Remove the rear washer fluid bottle as outlined in this section.
- Drain the contents of the bottle into a holding container.
- Grasp the washer fluid pump and pull it out of the bottle.
Notice: Do not reuse washer fluid as debris may clog the system.
Installation Procedure
- Lubricate the washer bottle grommet with soapy water or grease.
- Insert the pump inlet spout into the rubber grommet.
- Push the pump in until seated into the bottle.
- Install the rear washer fluid bottle as outlined in this section.
