Automatic Transmission Shift Lock Control Diagnosis for Saturn SL1/SC1/SW1 1999
- Check solenoid connector for open, spread or
corroded terminals.
- Test solenoid:
| 2.1. | Remove BTSI solenoid. (Refer to "Brake Transaxle Shift Interlock (BTSI)
System" removal procedure in this service manual.) |
| 2.2. | Ground terminal A of the BTSI solenoid and apply 12 volts to terminal
B. |
| • | When 12 volts are applied to the BTSI solenoid, the actuator rod should
not be able to move. |
| • | If the actuator rod can move with 12 volts applied, replace the BTSI solenoid. |