For 1990-2009 cars only
Removal Procedure
- From under the vehicle, remove the front push pin from the wheelhouse liner.
- Disconnect the wiring harness from the pump.
- Place the holding container under the pump to catch the solvent from the container.
- Disconnect the hose from the pump.
- Remove the pump by pulling firmly.
Installation Procedure
- Install the pump by pushing firmly into the opening in the container.
- Connect the hose to the pump.
- Connect the wiring harness to the pump.
- Install the front push pin to the wheelhouse liner.
- Fill the solvent container with washer solvent.
Notice: Do not reuse washer fluid as debris may clog the system.
