GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2001 🢒 SL1/SC1/SW1 🢒 Body and Accessories 🢒 Collision Repair 🢒 Panel Torque Box Upper and Lower Replacement

    Object Number: 862104 Size: MF
  1. Remove the sealer.
  2. Drill spot welds from:
    3. 2.1. The rail assembly-engine compartment side
    2.2. The torque box extension and lower dash assembly
  3. Clean all of the weld seams with a wire brush, prime, and seal all repair areas.
  4. Apply a permanent underbody sealant.

    5. Important: Ensure that proper corrosion protection processes are used on all repair areas.

  5. Prime with a 2-part catalyzed primer.
  6. Apply sealers and corrosion protection materials according to the information in the Body Paint section of this service manual or the paint manufacturer's recommendations.
  7. Clean the surface for welding and grind the primer off of the new part at the connecting points. Apply 3M® Weld-Thru Coating P/N 05913, or equivalent, to all areas to be welded.
  8. Measure and align the panel torque box upper an lower. Clamp into place.
  9. Use a MIG to plug the weld.