Service Information Regarding Engine Rear Main Oil Seal Assembly
| Subject: | Service Information Regarding Engine Rear Main Oil Seal Assembly |
| Models: | 2000 Saturn S-Series Sedans and Wagons built between and including VIN YZ255208 to YZ255982. |
| 2001 Saturn S-Series Coupes built between and including VINs 1Z113923 to 1Z114180 |
Purpose
The purpose of this bulletin is to provide service information and parts requirements for approximately 1050 vehicles that were built with a one-piece design rear main oil seal assembly. The one-piece design seal has a stamped steel carrier with an integrated Teflon seal.
If a 2000-2001 vehicle equipped with one-piece design stamped steel seal assembly requires service, the one-piece design seal needs to be replaced with the previous two-piece design cast aluminium carrier seal assembly (P/N 21006927). Four new bolts (P/N 11513762), which are 20 mm long, will also be required to install the two-piece design cast aluminum carrier seal assembly.
For complete rear main oil seal replacement procedure, refer to the "Rear Crankshaft Oil Seal Replacement" procedure in the Engine Mechanical section of the 2000-2001 S-Series Engine Service Manual.
Parts Information
PARTS REQUIREMENTS: | 21006927 | Seal Assembly - Crankshaft Rear Oil |
11513762 | Bolt/Screw - Crankshaft Rear Oil Seal Housing (20 mm Long) |
Claim Information
CLAIM INFORMATION: | To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System for J1080 (Carrier and Gasket, rear Main Seal - Replace) or if another procedure is performed, refer to the appropriate Electronic Labor Time Guide for the correct Labor Operation Code and Time. |
