GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 1998 🢒 SL2/SC2/SW2 🢒 Body and Accessories 🢒 Stationary Windows 🢒 Body Side Window Replacement

Removal Procedure

    Object Number: 861000 Size: SH
  1. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Insert Replacement in Doors.
  2. Partially remove the upper door frame inner seal at the location of the stationary window.
  3. Peel back the water deflector at bolt access hole and remove the bolt from the stationary window.
  4. Remove the stationary window.

Installation Procedure

    Notice: Refer to Title not found in the Preface section.

  1. Install the stationary glass and fasten with the bolt.

    2. Tighten
    Tighten the rear side door stationary window fastener to 11 N·m (97 lb in).

  2. Replace the water deflector at the access hole location.
  3. Install the upper door frame inner seal, sliding it down around the window.
  4. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Insert Replacement in Doors.