Removal Procedure
- Using a soft marker, mark around the striker for installation purposes.
- Remove the screws, remove the striker and striker shim if present.
Installation Procedure
- Loosely install the striker and striker shim, if present, with screws.
- Align the striker with marks made prior to removal.
- Tighten the screws.
- Check the door closing and align the striker as required.
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the striker screws.
Tighten
Tighten the door striker front bolts to 25 N·m (18 lb in).