Removal Procedure
- Disconnect
the negative battery cable.
- Remove the mirror glass. Refer to
Outside Rearview Mirror Glass Replacement
.
- Remove the interior trim cover.
- Remove the foam filler.
- Disconnect the electrical connector from the door harness. Remove the
attaching screws.
- Unseat the harness grommet and remove the motor.
Installation Procedure
- Connect the electrical connector and the seat grommet.
- Install the foam filler.
- Install the motor.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws and tighten.
Tighten
Tighten the Power Mirror Motor Screw 3 N·m
(27 lb in).
- Snap
the mirror glass assembly onto the motor. Refer to
Outside Rearview Mirror Glass Replacement
.
- Install the trim cover.
- Connect the negative battery cable.
- Set the clock.