Removal Procedure
- Remove the door outer panel. Refer to
Front Side Door Outer Panel
.
- Partially remove the door insulator.
- Disconnect the lock rod from the actuator.
- Drive the center pin rearward enough to allow the head of the rivet to
be drilled. Drill out the rivets and remove the actuator.
- Cut the remaining portion of the rivets short and push through the hole
in the door assembly. Disconnect the inner trim panel and remove the rivets.
Installation Procedure
- Install the actuator with the rivets. Connect the harness and connect
the lock rod to the actuator.
- Install the trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Install the outer panel. Refer to
Front Side Door Outer Panel
.