Removal Procedure
Important: Record all pre-set radio stations.
- Turn the ignition OFF.
- Remove the battery box. Refer to
Battery Box Replacement
.
- Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnection and Connection
.
- Disconnect the positive battery cable.
Caution: Do not tip the battery over a 45 degree angle or acid could spill causing
serious personal injury.
- Loosen the battery hold down bolt and remove the
battery.
Installation Procedure
Caution: Do not tip the battery over a 45 degree angle or acid could spill causing
serious personal injury.
- Install the battery and tighten the battery
hold down bolt.
Tighten
Tighten the battery hold down bolt to 15 N·m
(11 lb ft).
- Connect the positive battery cable to the battery.
Tighten
Tighten the battery terminal bolts to 17 N·m
(13 lb ft).
- Connect the negative battery cable to the battery. Refer to
Battery Negative Cable Disconnection and Connection
.
Tighten
Tighten the battery terminal bolts to 17 N·m
(13 lb ft).
- Install the battery box. Refer to
Battery Box Replacement
.
Tighten
Tighten the battery cooling cover box screws to
2 N·m (18 lb in).
- Reprogram the radio stations.