Tools Required
• | J 43963 Valve
Spring Compressor |
- Coat the valve stem with
engine oil.
- Insert the valve stem into the proper port.
- Install the valve spring seat.
- Use the J 41775
to
insert the valve seal into the cylinder head.
- Install the valve spring.
- Install the cap on the valve stem.
- Use the SA9102E-A
and J 43963
to
compress the valve spring.
- Perform the following steps to install the valve stem keys:
8.1. | Use a light grease to hold the keys in place while removing the SA9102E-A
and J 43963
. |
8.2. | Seat the valve stem keys in the upper groove of the valve stem. |
- Install the lifter.
- Repeat the above sequence for the remaining valves.