GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - AWD 🢒 Engine 🢒 Engine Controls - 3.0L (L81) 🢒 1-2-Reverse Carrier Gear Assembly Installation

    Object Number: 749472 Size: SH
  1. Rotate the transmission case assembly so that the torque converter housing side is facing up.
  2. Install the 1-2 reverse internal gear rear thrust bearing assembly (595) with the flat side up.

    3. Important: A shim (596) is available for proper endplay for the front differential transfer drive gear assembly. Early production transmission did not use the shim.

  3. Install the 1-2 reverse internal gear shim (596) without any markings. Correct shim selection is performed during the front differential transfer drive gear assembly installation.
  4. Install the 1-2 reverse internal gear front thrust bearing assembly (593) with the flange up.

    5. Object Number: 749470 Size: SH
  5. Install the 1-2 reverse internal gear thrust washer (590) to the lower side of the 1-2 reverse carrier gear assembly (591).
  6. Install the 1-2 reverse carrier gear assembly (591) into the 1-2 reverse internal gear (594). The carrier assembly will be flush to the 1-2 reverse internal gear.
  7. Install the 1-2 reverse carrier thrust washer (590) on top of the 1-2 reverse carrier gear assembly (591).