Tools Required

1. Remove the bolt and the lube oil pipe from the transmission case assembly.



2. Remove the reverse clutch hub assembly.
3. Remove the thrust washer for the reverse clutch hub assembly.



4. Remove the retaining ring for the reverse clutch backing plate.
5. Remove the reverse clutch backing plate.
6. Remove the reverse clutch plates, three each.
7. Remove the reverse clutch waved plate.



8. Using the J 23327 and J 38734 , compress the reverse clutch spring assembly.
9. Remove the reverse clutch spring retaining ring.
10. Remove the J 23327 and J 38734 .
11. Remove the reverse clutch spring assembly.



12. Apply shop air to the reverse clutch fluid port in the transmission case assembly in order to release the reverse clutch piston assembly.
13. Remove the reverse clutch piston assembly.