Removal Procedure
- Remove the control lever knob retainer.
- Remove the control lever knob.
- Remove the console. Refer to
Console Replacement
removal
procedure in this section.
- Remove the indicator bulb by rotating the bulb one-quarter
turn and pulling out.
- Using a screwdriver, remove the PRNDL
face and the bracket by depressing on the tabs. Replace if necessary.
Installation Procedure
- Install the PRNDL assembly onto the shifter
assembly.
- Install the indicator bulb by inserting
and rotating one-quarter turn.
- Insert the console. Refer to
Console Replacement
installation
procedure in this section.
- Install the control lever knob.
- Install the control lever knob retainer.