Removal Procedure
- Remove the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.
- Remove the sunroof window. Refer to
Sunroof Window Replacement
.
- Disconnect the sunroof motor harness.
- Remove the screws securing the sunroof actuator to the sunroof module.
- Remove the sunroof motor.
Installation Procedure
- Manually adjust the track to achieve a distance of (a) 44.5 mm
(1.75 in) between the left slide and track bracket.
- Manually adjust the track to achieve a distance of (a) 44.5 mm
(1.75 in) between the right slide and track bracket.
- Install the sunroof motor to the sunroof module.
Notice: Refer to Fastener Notice in the Preface section.
- Install the sunroof motor screws.
Tighten
Tighten the screws to 5 N·m (44 lb in).
- Connect the electrical connectors to the sunroof motor.
- Secure the electrical harness to the sunroof module.
- Verify the sunroof operation.
- Install the sunroof window. Refer to
Sunroof Window Replacement
.
- Install the headliner. Refer to
Headlining Trim Panel Replacement
in Interior Trim.