Removal Procedure
- Remove
the rear door carpet retainer. Refer to
Rear Carpet Retainer Replacement
.
- Remove the rear door weatherstrip seal from the door flange by starting
at the seal joint at the bottom of the door opening.
- Separate the seal at the joint, note the position for installation.
- Remove the seal from the door flange.
Installation Procedure
- Position
the seal over the flange area in the position noted in the removal procedure.
- Press the seal over the flange firmly to fully secure.
- Locate an exposed end of the ripcord at the seal joint and pull the ripcord
around the door opening. If the seal lip is tucked under any door trim, this process
will bring the seal lip over the door trim and headliner.
- Install the rear door carpet retainer. Refer to
Rear Carpet Retainer Replacement
.