For 1990-2009 cars only
Removal Procedure
- Remove the center pillar auxiliary weatherstrip by pulling the weatherstrip down and away from vehicle.
- Use a clean rag and 3M General Purpose Adhesive Cleaner 08984 or the equivalent in order to wipe any remaining adhesive from the center pillar.
Installation Procedure
- Clean the area where the weatherstrip will be installed.
- Remove the tape from the weatherstrip to expose the adhesive.
- Install the center pillar auxiliary weatherstrip to the vehicle.
Use a lint free cloth and Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture by volume of isopropyl alcohol and water to clean the area.
