Removal Procedure
- Lower the rear door window.
- Remove the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Starting at one end, carefully pull the window weatherstrip run channel
assembly from the door frame.
Installation Procedure
- Align the notch in the window weatherstrip seal to the fixed glass post and
press the weatherstrip onto the window flange.
• | Press the weatherstrip run channel onto the door flange. |
• | Check to make sure the channel is fully secured into the upper corners
of the door frame. |
- Install the rear door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.