GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the front door trim panel upper extension. Refer to Upper Extension Trim Panel Replacement .

  2. Object Number: 929525  Size: SH
  3. Remove the front mirror. Refer to Outside Rearview Mirror Replacement .
  4. Remove the front outside door handle. Refer to Front Side Door Outside Handle Replacement .
  5. Remove the front outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  6. Remove the outer door panel fasteners.
  7. Remove the front outer door panel.
  8. If the panel is being replaced, remove the door lock cylinder bezel.

  9. Object Number: 897839  Size: SH
  10. If the panel is being replaced, remove the U-nuts.

Installation Procedure


    Object Number: 929525  Size: SH
  1. If the panel is being replaced, Install the door lock cylinder bezel.

  2. Object Number: 897839  Size: SH
  3. If the panel is being replaced, Install the U-nuts.
  4. Install the outer door panel on the door structure.
  5. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 928910  Size: SH
  6. Install the outer door panel fasteners. Tighten in the sequence shown.
  7. Tighten
    Tighten the fasteners to 8 N·m (71 lb in).

  8. Install the front outer belt sealing strip. Refer to Front Side Door Window Belt Outer Sealing Strip Replacement .
  9. Install the front outside door handle. Refer to Front Side Door Outside Handle Replacement .
  10. Install the front mirror. Refer to Outside Rearview Mirror Replacement .
  11. Install the front door trim panel upper extension. Refer to Upper Extension Trim Panel Replacement .