GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 929755  Size: SH
  1. Remove the rear outside door handle. Refer to Rear Side Door Outside Handle Replacement .
  2. Remove the rear outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  3. Remove the outer door panel fasteners.
  4. Remove the outer door panel from the vehicle.
  5. If the panel is being replaced, remove the U-nuts.

Installation Procedure


    Object Number: 929755  Size: SH
  1. If the panel is being replaced, Install the U-nuts.
  2. Install the outer door panel on the door structure.
  3. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 928897  Size: SH
  4. Install the outer door panel fasteners. Tighten in the sequence shown.
  5. Tighten
    Tighten the fasteners to 8 N·m (71 lb in).

  6. Install the rear outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  7. Install the rear outside door handle. Refer to Rear Side Door Outside Handle Replacement .