GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2002 🢒 VUE - AWD 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

    2. Object Number: 929957 Size: SH

    Important: Hold the ball shaft secure with a TORX® bit, when removing the nut.

  2. Remove the stabilizer link to stabilizer bar nut.

    3. Object Number: 930236 Size: SH
  3. Remove the stabilizer bar clamp bolts.
  4. Disengage the stabilizer bar from the stabilizer link ball studs, while removing the stabilizer bar from the vehicle.

Installation Procedure
  1. Position the stabilizer in the vehicle, while positioning the links to the stabilizer bar.

    2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 930236 Size: SH
  2. Install the stabilizer bar clamp bolts.

    3. Tighten
    Tighten the bolts to 70 N·m (52 lb ft).


    Object Number: 929957 Size: SH

    Important: Hold the ball shaft secure with a TORX® bit, when installing the nut.

  3. Install the stabilizer link to stabilizer bar nut.

    4. Tighten
    Tighten the nut to 47 N·m (35 lb ft).

  4. Lower the vehicle.