For 1990-2009 cars only
- Open the hood.
- Remove the side marker fasteners.
- Remove the side marker lamp from the body of the vehicle.
- Rotate the side marker bulb socket counterclockwise and remove it from the housing.
- Remove the side marker housing.
- Remove the fasteners from the headlamp assembly.
- Insert a flat blade screwdriver through the opening in the top. Make sure the screwdriver fits through the opening in the headlamp bracket lower arm.
- Push the locking tab toward the rear of the vehicle with the screwdriver to lift the headlamp bracket lower arm.
- Lift up the assembly.
- Disconnect the electrical connector from the bulb assembly.
- Rotate the bulb assembly counterclockwise to remove it from the housing.
- Connect the electrical connector to headlamp bulb assembly.
- Insert headlamp bulb assembly into headlamp housing, and rotate clockwise until seated.
- Lower headlamp into position.
- Install headlamp assembly fasteners.
