GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 926677  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  3. Remove the brake rotor. Refer to Brake Rotor Replacement .
  4. Disconnect the wheel speed sensor electrical connector.

  5. Object Number: 929664  Size: SH
  6. Remove the wheel speed sensor bolt.
  7. Remove the wheel speed sensor.

Installation Procedure


    Object Number: 929664  Size: SH
  1. Install the wheel speed sensor to the wheel bearing/hub assembly.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the wheel speed sensor mounting bolt.
  4. Tighten
    Tighten the bolt to 8 N·m (71 lb in).


    Object Number: 926677  Size: SH
  5. Connect the wheel speed sensor electrical connector.
  6. Install the brake rotor. Refer to Brake Rotor Replacement .
  7. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  8. Lower the vehicle.