GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2003 🢒 VUE - AWD 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Rear License Plate Lamp Replacement

Removal Procedure
  1. Remove the lift gate interior trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.
  2. Remove the rear wiper assembly. Refer to Liftgate Wiper Motor Replacement in Wiper/Washer Systems.

    3. Object Number: 933002 Size: SH
  3. Disconnect the license lamp electrical connector.
  4. Remove the license lamp bezel to lift gate nuts.
  5. Remove the license bezel housing from the vehicle.

Installation Procedure

    Object Number: 933002 Size: SH
  1. Position the license lamp bezel on the lift gate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the license lamp bezel to lift gate nuts.

    3. Tighten
    Tighten the nuts to 4 N·m (35 lb in).

  3. Connect the license lamp electrical connector.
  4. Install the rear wiper assembly. Refer to Liftgate Wiper Motor Replacement in Wiper/Washer Systems.
  5. Install the lift gate interior trim panel. Refer to Liftgate Trim Panel Replacement in Body Rear End.