Windshield Wiper System Module Replacement Old

1. Remove the wiper arms. Refer to Windshield Wiper Arm Replacement .
2. Remove the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.



3. Remove the wiper module bolts.
4. Lift the wiper motor module away from the cowl.
5. Disconnect the wire harness rosebud clip from the wiper module frame.
6. Disconnect the wiper module electrical connector at the motor.

1. Connect the wiper module electrical connector to the motor.
2. Connect the wire harness rosebud clip to the wiper module frame.
3. Install the wiper module assembly into the plenum.

Notice: Refer to Fastener Notice in the Preface section.

4. Install the fasteners attaching the wiper module assembly to the plenum.

Tighten
Tighten the fasteners to 12 N·m (9 lb ft)

5. Turn the key to RUN position and cycle wiper system to ensure motor is in the park position.
6. Install the air inlet screens. Refer to Air Inlet Grille Panel Replacement in Body Front End.
7. Install the wiper arms. Refer to Windshield Wiper Arm Replacement .