Removal Procedure
- Remove
the radio bezel. Refer to
Radio Replacement
in
Entertainment.
- Disconnect the body control module (BCM) electrical harnesses.
- Remove the BCM from the instrument panel (I/P) retainer:
3.1. | Pry the BCM tabs from the locking tabs on the underside of the restraint. |
3.2. | Slide the BCM out of the retainer. |
Installation Procedure
- Install
the BCM.
- Install the radio bezel. Refer to
Radio Replacement
in Entertainment.
- Slide the BCM tabs into the slots in the I/P retainer until the tabs lock
into place.
- Connect the electrical connectors.
- Program a new or a remanufactured BCM. Refer to
Body Control Module (BCM) Programming/RPO Configuration
.